Unbagging Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

Unbagging Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

For further information go to Mr. Locksmith Salt Spring Island

Unbagging Lock Tech GM Ignition Removal

So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.

So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products,  by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.

These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.

All four (4) of GM Ignition Removal Tools Set

We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.

Mr. Locksmith Victoria

Victoria Locksmith Main: (250) 999-8990

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training 

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

 

 

About Terry Whin-Yates

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

https://mrlocksmithvancouver.com/about-terry-whin-yates/

 

Mr. Locksmith Hands-On Locksmith Training in Las Vegas!

Mr. Locksmith Hands-On Locksmith Training in Las Vegas!

For further info go to Mr. Locksmith Training.

Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith, In-House Institutional Locksmith or start your own locksmith business.

Upcoming Classes in LAS VEGAS, NEVADA

Mr Locksmith Training Las Vegas

In this training you will:

  • Cut and duplicate keys on code key machines and key duplicator machines.
  • Rekey locks
  • Shim
  • Trouble shoot
  • Pick locks
  • Take apart (and put back together) locks (deadbolts and key in knobs).
  • Lock-outs, broken keys and picking locks.
  • Design a mini Master key system and master key their locks.
  • Rekey Deadbolt
  • Rekey Key in Knobs
  • Shiming a lock
  • Locksmith Training
  • Picking a lock
  • Opening a lock with no keys
  • Single pin picking, Feel Method, French Method
  • Raking, Jiggling, Bumping, Scrubbing
  • Can you lock even be picked?
  • High Security Locks
  • Tubular, Ace, etc.
  • Lock has malfunctioned.
  • Reading
  • Buying Picks
  • Making Picks
  • Electronic Picks
  • Pick Guns
  • Methods of Entry
  • Legal Issues
  • Tactics
  • Tools
  • Preparation for Entry
  • Setup your own Lock Practice Boards
  • Automotive Lock Picking
  • Other Lock Bypass Methods
  • DAME (Defense Against Methods of Entry)
  • And lots more!

The Mr. Locksmith Hands-On Locksmithing Course includes all supplies, lock picks, tools and material needed to take the course with.

This class is only $1,500.00.

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool and spiral pins.

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert:”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.

All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!

In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.

Upcoming Classes in LAS VEGAS, NEVADA

See you in Las Vegas!

“If I’d only known, I would have been a locksmith.” Albert Einstein

Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to http://mrlocksmithtraining.com/

Terry Whin-Yates BA (Hons) Criminology, 3rd Generation Locksmith, 35+ Years Locksmith email: terry@mrlocksmith.com

https://youtu.be/KS-Q7C3Smh4https://youtu.be/cqnrQx93g2c

Langley BC Locksmith Training April 23-26, 2018

Interested in locksmith training? Want to become a locksmith? This course is for you and it’s filling up fast! April 23-26, 2018 in Langley, BC.

Professional One Day Hands-On Locksmith and Lock Picking Training

For further information go to www.mrlocksmith.com

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology.

I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques.

Terry Whin-Yates Opens locked safe

Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock.

I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool and spiral pins.

We will cover and discuss:

  • Rekey Deadbolt
  • Rekey Key in Knobs
  • Shiming a lock
  • Picking a lock
  • Opening a lock with no keys
  • Single pin picking, Feel Method, French Method
  • Raking, Jiggling, Bumping, Scrubbing
  • Can you lock even be picked?
  • High Security Locks
  • Tubular, Ace, etc.
  • Lock has malfunctioned.
  • Reading
  • Buying Picks
  • Making Picks
  • Electronic Picks
  • Pick Guns
  • Methods of Entry
  • Legal Issues
  • Tactics
  • Tools
  • Preparation for Entry
  • Setup your own Lock Practice Boards
  • Automotive Lock Picking
  • Other Lock Bypass Methods
  • DAME (Defense Against Methods of Entry)
  • And lots more!

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book.

Mr. Locksmith Vancouver Hastings B&E Broken Door

FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert:”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos.

Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force or Commissionaires. In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.

Note: The following do not need an extra security clearance but must show Valid ID : Police, Sheriffs, BC and Alberta Licensed Locksmiths, School and Hospital Employees

SIGN UP NOW!

 

Training Dates:

British Columbia

 

Langley : April 23-26, 2018 10am – 4pm  4 Day Hands-on Locksmith Class $1500.00 US

 

BC Security Licensing New Regulations

The Government of British Columbia, Security Licensing Division has released their new “laxed” requirements for obtaining a security license to work as a security worker (or a locksmith) in British Columbia. The BC Security Licensing requirements are as follows.

BC Locksmith Licensing Requirements

BC Locksmith Licensing New Rules:

It is now official in British Columbia, Canada the Ministry of Public Safety and Solicitor General in charge of Locksmith Licensing issued by the Registrar of Security Services has now downgraded locksmith applicants and business to only three (3) requirements.

BC Locksmith Licensing Rules:

– Not presently be incarcerated. 
– Not recently been convicted of molesting the dead
– Have Cheque payable to “Province of BC”

Questions about BC Security Licensing?

Toll free – 1 855 587-0185 (press option 1)

 

 

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/